Water and wastewater charges

Council charges a range of user fees for requests relating to wastewater, trade waste, water supply, and Council laboratory requests. 

Wastewater

Wastewater network/treatment 

2025/26 Fee

Application Fee - New Residential Connection / Disconnection (permanent or temporary)  $60
Inspection Fee for New Connection / Disconnection, per hour charge  $185 per hour
Septage disposal and treatment, per cubic metre  $40

Trade Waste*

Trade Waste fee/charges

2025/26 Fee

Total volume per cubic meter $1.00
Total solids - total kg discharged $0.75
Chemical Oxygen Demand (COD) - total kg discharged $0.50
Total nitrogen - total kg discharged $2.75
Total phosphorus - total kg discharged $8.00

*Volumetric charges per Trade Waste Bylaw 2019. Load based charges on renewal of trade waste consents.

Water

Water 

2025/26 Fee

Application Fee - New residential connection / disconnection (permanent or temporary)  $60
Installation fee: New residential connection / disconnection (permanent or temporary)  Quoted per site
Water metering configuration modifications Quoted per site
Special reading – water meters $50
Water dedicated filling point access card (Annual Fee) $100
Water Volume charge from dedicated filling points 1.50 times the m³ water rate
Water meter accuracy testing for water meters up to DN25mm. Quoted per site for water meters greater than DN25mm $464

Districtwide water supply fixed rate (per separately used or inhabited part of a rating unit): Refer to the Funding Impact statement – rating policies.

Districtwide volumetric water supply rate (per cubic metre of water consumed): Refer to the Funding Impact statement – rating policies.

Laboratory

Testing of water – laboratory charges 

2025/26 Fee

Alkalinity g/m³ (CaC03) $28
Ammonia-N g/m³  $33
BOD g/m³ $38
Bore depth (m) $9
cBOD g/m³ $45
Chloride g/m³ $29
COD g/m³  $42
Conductivity mS/cm $15
DO g/m³ $13
DRP-P g/m³ $33
E. coli cfu/100mL (m Tec River monitoring only)  $30
F/Coli + E. coli (NaMug –mbr-filt) cfu/100mL $48
Enterococci cfu/100ml (mbr Filt) $33
F/Coli cfu/100mL (mbr Filt) $30
Fluoride g/m³ $39
Iron g/m³ $33
Nitrite-N g/m³ $33
Nitrate-N g/m³ $33
pH $15
Staff collection hour (2 staff)  $185
Total suspended solids (TSS) g/m³ $29
TEMP °C $13
Total coliforms and E.coli (Colilert) mpn/100mL $49
Total nitrogen g/m³  $47
Total phosphorus – P g/m³  $33
Total solids %  $19
Travel (per KM)  $1.04
Total solids g/m³ $27
Turbidity NTU  $16
UV transmission $15
Laboratory administration cost – report documentation (per report) $27
Sample bottle (including chilly pack preparation) each $5